Distributors Support Anchor Drives Diggers Brakes Final Drives Gear Drives About Home

Anchor Drive Product Specifications

Eskridge planetary anchor drives are the most widely used and respected tools in the anchor installation industry. The anchor drives are attached to mini-excavators, skid steers, backhoe loaders and excavators throughout the country. The drives can be powered by the prime mover or by independent hydraulic power source.

View our brochure in Web format (400kb) or PDF Format (1.4 MB)

Watch the video of the "Big Daddy" D1000 digger (Requires Windows Media Player. File is 500 kb.)

1,500 - 5,000 3,000 2" 10,000 15,000 1" 150
To 20,000 To 2,750 2 5/8" or
3"
30,000 30,000 1.51" or 2.01" 510
To 12,000 2,500 2 1/2" or
2 5/8"
15,000 15,000 1.26" or 1.51" 250
To 12,000 2,500 2" or 2 1/2" or
2 5/8"
15,000 15,000 1.26" or 1.51" 250 w/motor
To 12,000 2,500 2 1/2" or
2 5/8"
15,000 15,000 1.26" or 1.51" 370
3,000 - 20,000 See specification sheet as these vary depending on the series. The kickdown system automatically shifts the unit from high-speed/low-torque to low-speed/high-torque operation when operating pressure exceeds 2,000 psi. Once shifted, the unit operates in low-speed/high-torque mode until the drive is stopped. Once stopped, the unit resets to high-speed/low-torque mode.
35,000 5,000 4" SQUARE 30,000 45,000 4" 1,100
50,000 5,000 5-1/4" SQUARE 50,000 95,000 4" 1,800
83,000 5,000 5-1/4" SQUARE 50,000 95,000 4" 1,800
115,000
5,000
5-1/4" SQUARE
50,000
95,000
4"
2,100
Heavy-duty hex shaft couplers. Attaches drive unit to the auger flighting and can adapt output shaft sizes. Rigid design provides better controllability and eliminates wear at the coupling.

The Eskridge 7848 K2 has over 9% more torque than a McMillen Extreme 14K2 digger. Read more.

 
 

Help viewing & printing our literature.

Home About Gear Drives Brakes Diggers Anchor Drives Support Distributors